DOT


Product Description MAOP Dimensions Permit
TCC Pressure vessel constructed of SA-240 316L stainless steel.
The maximum capacity is 2.5 gallons.
136 psig ID:
9.0: Ref.
Height:
20.9" Ref.
DOT-SP 16074
CP-35 Piston style receptacle has flat heads on each end restrained with tie rods secured at each end by nuts or
with tie rods threaded into an end cap and secured by nuts on the other end.
The maximum volume may not exceed 1,000 cc.
600 psig Maximum OD x length:
2.0" x 29"
Minimum side wall thickness:
0.11"
DOT-SP 10370
CP-2HP Piston style receptacle has flat heads on each end restrained with 6-1/2 inch tie rods
which are secured by nuts at one end and threaded into the flat head at the other end.
The maximum volume may not exceed 1,000 cc.
3,600 psig Maximum inside diameter:
1.780"
Maximum length:
48.05"
Minimum side wall thickness:
0.235"
DOT-SP 11054
CP-5
(Single)
Single cavity receptacle (without pistons) has flat heads on each end restrained with 8-5/8 inch tie rods which are secured by nuts.
The receptacle has an eight bolt configuration.
The maximum volume may not exceed 6,000 cc.
2,160 psig Maximum inside diameter:
3.785"
Maximum length:
39.5"
Minimum side wall thickness:
0.192"
DOT-SP 11054
CP-5
(Piston)
Piston style receptacle has flat heads on each end restrained with 8-5/8 inch tie rods which are secured by nuts.
The maximum volume may not exceed 6,000 cc.
6 bolt:
1,800 psig
8 bolt:
2,160 psig
Maximum inside diameter:
3.785"
Maximum length:
39.5"
Minimum side wall thickness:
0.192"
DOT-SP 11054
CP-4
(15 cc-100 cc)

Piston style receptacle has threaded flat end caps on each end without tie rods.
The maximum volume may not exceed 100 cc.

1,800 psig Number and size of tie rods:
None
Maximum OD x length:
1.25" x 14"
Minimum side wall thickness (threaded):
0.074"
Minimum side wall thickness (not threaded):
0.055"
DOT-SP 7657
CP-2
50 cc-1,000 cc)

Piston style receptacle has flat heads on each end restrained with tie rods secured at each end by nuts or
with tie rods threaded into an end cap and secured by nuts on the other end.
The maximum volume may not exceed 1,000 cc.

1,800 psig Number and size of tie rods:
6 x 3/8" OD
Maximum OD x length:
2.0" x 29"
Minimum side wall thickness
(threaded):
0.105"
Minimum side wall thickness
(not threaded):
0.083"
DOT-SP 7657